For most Sydney professionals, the semi-spread collar is the strongest starting point – it works with or without a tie, suits most face shapes, and reads as appropriately formal across CBD law firms, finance offices and boardrooms. The spread and cutaway collars open the neckline further and suit a wider tie knot or a confident open collar. The button-down belongs in business casual environments, not formal ones.
That is the short answer to the best collar style for a business shirt in Australia. The rest of this shirt collar guide covers the five business shirt collar styles you will meet in Sydney offices: semi-spread, spread, cutaway, button-down and point. It also shows how to choose between them by face shape, tie knot and workplace. All measurements are tip-to-tip across the front of the collar. They vary a little between shirtmakers, so treat them as a guide.
Sydney’s professional dress sits somewhere between formal tradition and a relaxed coastal habit. A CBD law firm, a North Sydney finance floor and a consulting office on the Pacific Highway each draw the line differently. The collar question comes up in nearly every consultation at the St Leonards studio, for a simple reason. Most clients have never been asked to choose one. They have worn whatever collar came on the off-the-rack shirt. In a consultation for made to measure business shirts in Sydney, I put the choice in front of them for the first time. The answer is usually obvious within minutes.
1. The Semi-Spread Collar – The Right Starting Point for Most Professionals
The semi-spread collar is the right starting point for most Sydney professionals, and it is the collar I put on most first-time made to measure shirts. It sits between the narrow point collar and the full spread. The points finish roughly 90–115 mm apart.
That width does a lot of work. It is wide enough to take a tie knot comfortably. It is not so wide that the collar looks awkward when the tie stays at home. A lawyer can wear the same shirt to a Monday client meeting and to a tie-free Friday, and the collar suits both. I do not hand out the word “versatile” casually, but this collar has earned it.
It also suits most faces. It neither lengthens nor widens, which makes it the safe answer when I am still working out what a client needs.
Pair it with a four-in-hand or a half-Windsor. Both sit cleanly in the opening. The points should finish just under the lapel of your jacket – not curling beneath it, and not riding out over it.
Our wedding shirt guide calls the spread collar the modern standard. The semi-spread is the narrower end of that same family, which is why it works so well in an office. That guide also has a lapel-matching chart if you are choosing a collar for formal wear.
A collar only holds a clean line if the cloth beneath it is right. Two-ply Egyptian cotton poplin keeps its collar crisp through a working day, and our fabric guide for made to measure shirts explains why. For the wardrobe where this collar does most of the work, the everyday professional shirt guide sets out the Classic Five.
2. The Spread Collar – For Open-Collar Confidence
The spread collar suits a wider tie knot or an open neckline, and it works best for professionals who want a more relaxed line. The points finish roughly 115–140 mm apart. That is clearly wider than the semi-spread, and you notice it across a room.
The style is associated with the Duke of Windsor in the 1930s, when the wide opening was cut to carry a fuller knot. It still does that job. With a tie, a half-Windsor is the safe default. A full Windsor or a Pratt (Shelby) knot fills the widest spreads. A thin four-in-hand can look lost in a very wide spread.
Worn open, the spread collar lies flat and frames the neck cleanly. That matters for the professional who rarely wears a tie but wants the shirt to look considered without one. Collar stays help the points sit flat, so the shirt keeps its shape without a tie holding the collar in place.
It suits creative industries, consultants, and executives in less formal environments. If your role is senior and client-facing, the made to measure executive shirts Sydney guide covers the fabric and collar precision those meetings demand.
On face shape, the spread collar widens the visual field around the neck and chest. It works well on longer or narrower faces, where it adds horizontal balance.
3. The Cutaway Collar – The Contemporary Formal Choice
The cutaway collar is the most open of the business shirt collars, and it needs a wide knot or a confident open neckline. The points finish roughly 150 mm apart or wider, and they sweep back towards horizontal. That is the whole character of the collar.
It was cut for large knots. A full Windsor or Pratt knot sits in a cutaway collar the way a small knot sits in a point collar. The opening is properly filled. Worn open, the cutaway also works, provided the collar has body and the outfit around it is equally considered. Without a tie, the wide points can splay, so the collar has to earn that freedom.
This is the most exposed collar of all. It shows the relationship between shirt and neck very clearly, so it asks for a clean, confident neckline. In Sydney it is strong in contemporary formal offices, where open-collar dress is standard, but the shirt still has to look deliberate.
“The cutaway is the one collar where the shirt is clearly making a statement. It works when the rest of the outfit – the jacket, the trousers, the shoes – is equally considered. On a standard off-the-rack suit it can look mismatched.”
On face shape, the cutaway works best on oval or longer faces. On shorter or rounder faces it can widen the face too far.
3.1 What Is the Difference Between a Spread Collar and a Cutaway Collar?
In Sydney offices, the difference comes down to width and the knot each collar is built for.
Spread collar: points roughly 115–140 mm apart, at a moderate angle. It suits a half-Windsor, a full Windsor, or an open neckline. It is the more versatile of the two, from the office to smart casual.
Cutaway collar: points roughly 150 mm apart or wider, swept back towards horizontal. It suits a full Windsor or Pratt knot or an open neckline with a considered outfit. It is the bolder, more contemporary statement.
4. The Button-Down Collar – Business Casual, Not Boardroom
A button-down-collar business shirt belongs in business casual, not the boardroom. The collar points fasten to the shirt with small buttons, which hold them in place without collar stays.
It began as a sporting collar. English polo players buttoned their collars down so the points would not flap during a match. An American clothier watched one of those matches in 1896 and took the idea home. It became a staple of American business casual through the Ivy League tradition.
In a Sydney professional context, it suits business-casual environments, Friday wear, creative agencies, and professions where a relaxed look is standard. It was never a formal collar, and it does not read as one.
4.1 Is a Button-Down Collar Appropriate for a Sydney Office?
In business casual environments, yes. In formal settings – courtrooms, formal client meetings, senior executive environments – no.
A tie changes the answer. A tie with a button-down collar reads as confused in a contemporary Sydney professional context. If a client wants one anyway, I suggest a relaxed four-in-hand in a textured fabric, and I keep it to casual settings. For anything formal, choose a different collar.
At Winslow, button-down collars are made by request. Most clients who ask for one are replacing a shirt they already own and know they like the collar on. The buttons hold the points, so this collar needs no stays. Every other collar relies on them, and our guide on how to care for a made to measure business shirt covers removing and refitting them.
5. The Point Collar – The Classic That Still Has a Place
The point collar is the narrow, traditional choice, and it still suits a certain kind of professional. The points finish roughly 40–75 mm apart. It is the most traditional of the five.
It works best with smaller knots, such as the four-in-hand, and it can balance a wider face. It is conservative and quietly formal. A professional who wears slimmer ties and likes a traditional line will be happy in one.
I still steer most clients to the semi-spread first, because it carries more tie widths and works open as well as with a tie. A point collar commits you to a smaller knot. If that is how you dress, it is a sound choice.
One more collar you may meet is the wing collar. It belongs to black tie, not the office, and our tuxedo shirt guide covers it.
6. Matching Collar Width to Face Shape
Collar width changes how the face reads, so I match the collar to the face as well as to the tie. These are the guidelines I use in the room.
6.1 What Collar Style Suits a Wide or Round Face?
A semi-spread, a moderate spread or a point collar suits a round or wide face. Avoid a full cutaway. It widens the visual field around the neck and face further.
The full set of pairings:
Oval face: all the collar styles work. The semi-spread is still the safest starting point.
Long or narrow face: a spread or cutaway collar adds horizontal width and balances the face. Avoid a very narrow-point collar.
Round or wide face: a semi-spread, a moderate spread or a point collar. Avoid a full cutaway.
Square face: a semi-spread or a spread. The horizontal line of the collar complements the jawline.
Check the collar against your jacket as well. The points should finish under the lapel, and a wider lapel carries a wider collar. The lapel chart in our wedding shirt guide shows how collar width follows lapel width.
7. Which Tie Knot Goes With Which Collar
The collar decides the knot, not the other way round. A knot that fills the space between the points looks right. A knot that crowds the points, or floats in the gap, does not.
7.1 Which Collar Style Works Best With a Tie?
The semi-spread collar with a four-in-hand or half-Windsor is the strongest all-round pairing. Here is the full guide.
Point collar: a four-in-hand or another small knot. A large knot crowds a narrow opening.
Semi-spread collar: a four-in-hand or half-Windsor. Both sit proportionately in the opening.
Spread collar: a half-Windsor as the default. A full Windsor or Pratt (Shelby) knot fills the widest spreads. A thin four-in-hand can look lost.
Cutaway collar: a full Windsor or Pratt knot. Worn without a tie, only with a considered outfit.
Button-down collar: a four-in-hand in a textured tie, in business casual settings only. Ideally no tie.
The test is simple. Tie the knot and look in the mirror. The collar points should lie flat against the shirt, and the knot should fill the opening without touching them.
Conclusion
The collar decision at Winslow is made in the room. I look at your face shape, ask where you work, and ask whether the shirt will mostly be worn with or without a tie. Most clients who have never been asked these questions find the answer obvious once they are. It takes about five minutes, and it shapes every shirt in the wardrobe.
This shirt collar guide is a starting point. The collar that suits you is settled at the St Leonards studio. The consultation is free, and we are open seven days until 9pm. Visit our gallery and follow us on Instagram to see how collars sit on real shirts. For the full service overview, see made to measure shirts Sydney. When you are ready, book a free consultation.

